For General Contractors

Control the conditions. Control the project.

As the GC, you're responsible for everything, including the environmental conditions that determine whether every trade's work succeeds or fails. CLīMIT gives you real-time visibility and documented proof across every phase of your project.

80%

80% of construction failures are environment-related, not workmanship.

3-5x

3-5x cost multiplier for rework vs. prevention with proper monitoring.

100%

100% of major warranties require documented site conditions to be valid.

The Three Environmental Threats

Every site faces these threats.
Most don't monitor any of them.

Environmental failures don't announce themselves. By the time a sub reports a problem, the damage is done, and the liability lands on you.

Freezing & Cold Conditions

Cold weather silently destroys work in progress. Concrete fails to cure, adhesives lose bond, paint blisters, and drywall compound never sets. By the time damage is visible, it's already too late to prevent costly rework.

Common Risk Factors

Concrete failing to achieve design strength when poured below 40°F

Adhesives losing bond strength and releasing within weeks of installation

Joint compound and paint freezing mid-application, causing surface failures

Pipes and MEP systems damaged by freeze-thaw cycles before commissioning

Moisture trapped in building envelope from condensation during cold snaps

Hot & High Heat Index Conditions

Extreme heat affects materials and people equally. Adhesives flash-dry before bonding, coatings cure too fast and delaminate, and workers experience heat stress that impairs judgment and slows productivity, increasing error and injury rates.

Common Risk Factors

Adhesives flashing off before flooring can be seated properly

Epoxy and urethane coatings blushing or bubbling from rapid cure

Concrete drying too quickly, causing surface cracking and reduced strength

OSHA heat index thresholds exceeded, requiring mandatory work stoppages

Worker heat exhaustion and heat stroke liability exposure

Humidity & Moisture Conditions

Moisture is the #1 cause of post-occupancy construction failures. High RH leads to mold, adhesive failure, and wood movement. Low RH causes cracking, gapping, and material shrinkage, all before the owner ever takes possession.

Common Risk Factors

Flooring failures from moisture-driven adhesive bond loss

Hardwood gapping and cupping from humidity swings during install

Drywall absorbing moisture and developing mold before closeout

Condensation forming on slabs and surfaces below the dew point

Warranty voidance when conditions fall outside manufacturer specs

Trade Oversight

You manage the trades. CLīMIT manages the conditions.

When something goes wrong, every sub points at someone else. Environmental data lets you know exactly what conditions existed, and who worked in them.

Trade Accountability

Provide subs with documented proof that conditions were within spec before they started work, and hold them accountable when they install outside approved windows.

Warranty Protection

Timestamped condition logs serve as defensible documentation against warranty claims from owners, developers, and insurance companies.

Stakeholder Transparency

Share real-time condition dashboards and PDF reports with owners, architects, and inspectors, building trust and demonstrating professional rigor.

Reduce Callbacks & Rework

Preventing a single significant rework event more than pays for years of monitoring. Environmental data proves what conditions existed, not what a sub claims.

Schedule Protection

Know in advance when conditions are unsafe to work. Plan proactively around environmental windows instead of reacting to failures after the fact.

OSHA Compliance

Heat index, light level, and temperature monitoring provide documented OSHA compliance evidence, protecting your company from costly citations and litigation.

Featured Projects