A game-changing technology for flooring installation quality control.
Construction conditions change constantly. Real-time, remote monitoring gives you visibility into every factor that determines project success, so you can respond before problems become failures.
Temperature
Humidity
Dew Point
Light
GPS
Real-time visibility is the difference
between success and failure.
Most construction failures aren't caused by poor workmanship. They're caused by invisible environmental changes that contractors never saw coming.
Avoidable Project Delays
Catching slab moisture requires mitigation change orders but can avoid costly post installation failures.
Carpet & Slab Moisture
Excess slab moisture destroys adhesive bonds and causes carpet failure, often discovered only after installation.
Highly Sensitive Materials
Sensitive architectural millwork, hardwood, and specialty finishes require tight environmental HVAC tolerances that are easy to miss without monitoring.
Jobsites Not Ready
Mobilizing crews before conditions are met leads to wasted labor, rework, and schedule overruns.
Manual Records & Reports
Paper logs and hand-written readings are inconsistent, incomplete, and difficult to defend in a warranty dispute.
Reliable Acclimation Monitoring
Wood and other organic materials must acclimate under documented conditions. Without proof, warranties are void.
Sensitive Green Materials
Eco-friendly and low-VOC materials are highly vulnerable to humidity swings during and after installation.
Wasted Time Driving to Sites
Without remote monitoring, contractors make unnecessary site visits just to check if conditions are acceptable.
Prevent Silent Failures
Environmental conditions often determine success or failure long before visible damage appears. Real-time monitoring catches problems early, before they become catastrophic.
Save Time & Money
Knowing conditions are right means no wasted trips to jobsites, no delayed mobilization, and no expensive callbacks. Every day of visibility saves thousands in potential costs.
Protect Your Warranty
Manufacturers require documented proof that conditions met spec at install time. Real-time monitoring creates defensible, timestamped records that manufacturers cannot dispute.
Build Client Trust
Clients see live data proving you monitored conditions every step of the way. This transparency builds confidence and protects you from liability disputes.
Optimize Project Timing
Stop guessing when conditions will be right. Data-driven decisions mean you schedule work when conditions are actually optimal, not when you hope they are.
Continuous Visibility
24/7 monitoring means you never miss a condition change. Whether it's a sudden temperature drop or humidity spike, you know instantly and can respond.
What happens without real-time visibility.
Real-time monitoring isn't a luxury feature. It's the foundation of professional construction and how the best contractors win more work, protect their installations, their warranties, and their reputation.
Adhesive Bond Failure
Concrete slab moisture conditions are essential to a successful flooring installation. Adhesives will break down over time if conditions are not properly monitored during installation.
Material Expansion & Contraction
Temperature swings cause materials to expand and contract which can result in gapping post-install. Real-time data lets you verify conditions are within manufacturer's specifications before, during and after install.
Condensation on Slabs
Dew point monitoring detects conditions where moisture will form on cold slabs, giving you the chance to act before adhesives, coatings, or flooring installations are compromised.
Warranty Disputes
Without timestamped data, you have no defense when manufacturers claim conditions were out of spec. Real-time monitoring eliminates doubt.
Costly Callbacks
Installation failures traceable to conditions cost 3 to 5 times the original job. Real-time monitoring prevents these expensive do-overs.
Reputational Damage
Jobsite failures spread quickly. Real-time monitoring and quick response prevent the reputation damage that costs far more than the initial work.
For high-end residential projects, to corporate towers or large scale data-centers
No WiFi Needed
Sensors connect over cellular. Works in basements, concrete structures, and remote sites with no internet access required.
No Power Required
Battery-powered sensors run for months on a single charge. Just place them and they start monitoring immediately.
Simple Setup
Out of the box and live in under two minutes. No IT, no installation crew, any crew member can deploy a sensor.
Real-Time Alerts
Instant notifications the moment conditions go out of spec, so you can act before a small shift becomes a costly failure.
Compare Conditions to Product or Association Specifications
Automatically compare live jobsite readings against manufacturer installation requirements and industry association standards, so you always know if you're in spec.
Add Unlimited Users on Projects
Add your general contractor, subcontractor, or CM to keep everyone on the same page.
Floorcloud Jobsite Condition Sensor
Temperature | Humidity | Dew Point | Light | GPS
Climate Measurements
| Temperature Range | -40°F to 149°F |
| Temp Accuracy (32°F to 149°F) | ±1.0°F |
| Temp Accuracy (-4°F to 32°F) | ±1.25°F |
| Humidity Range | 0 to 100% |
| Humidity Accuracy (20% to 80%) | ±3% |
| Light | Foot candles |
Power
| Battery Life | Up to 60 to 90 days |
| Charge Time | 2 to 3 hrs (0 to 100%) |
| Capacity | 4000mAh Li-oN |
| Charging | Micro-USB B |
Physical
| Grade | Industrial |
| Dimensions | 4.7" x 2.5" x 1" |
| Weight | 5.5 oz. |
| Drop Rating | 4 ft onto concrete |
| Sealing | IP67 (Dust and Moisture) |
Network and Connectivity
| LTE | Cat-M1 |
| GPS | 2G GSM GPRS - Quad Band |
| Cellular | Cell ID |
| Regulatory | FCC: Part 15, 22, 24 |
| Environmental | RoHS |
Explore by contractor type
See how CLīMIT works for your trade
Start monitoring today.
See how real-time conditions monitoring transforms the way you approach construction projects.